Lazer Full Face Helmets

Safety Tech and Impact Protection: The KinetiCore Advantage

Most rotational impact systems work by adding a low-friction layer between the outer shell and the EPS foam - the idea being that your head moves independently of the helmet during an angled impact. It works, but it adds weight and can compromise how tightly ventilation channels can be cut. Lazer's approach with KinetiCore is different. The protection is built directly into the EPS foam itself, using a series of precisely shaped crumple zones that deform in a controlled way under both linear and rotational loads. No extra layer. No compromise on shell thickness or airflow.

For gravity riding, that matters. A full face helmet takes serious hits - not just the glancing tumbles of trail riding, but high-speed offs where the chin bar hits first and the rotational forces are significant. Lazer's ASTM downhill certification covers exactly that scenario: the chin bar is tested to withstand the kind of force a proper get-off generates, and the shell is assessed for integrity at speeds where most riders are very grateful for good armour. Compared to options like Fox full face helmets or Bell full face helmets, Lazer's integrated approach keeps the overall construction notably tidy - there's a cleanness to the build that reflects how seriously they've thought about where the weight actually needs to go.

The lightweight fiberglass and carbon composite shells reinforce that. Carbon composite in particular keeps stiffness high without piling on grams, which you'll notice on longer enduro days when your neck is already working hard by the final stage.

Understanding the Lazer Fit and Range

Lazer's gravity helmet range isn't enormous, but it's well considered. The Cage KinetiCore is the headline enduro and all-mountain lid - designed for riders who need a full face for the chunky stuff but are still covering significant ground under their own power. The Chase sits at the more committed downhill end: heavier protection, more coverage, aimed squarely at bike park laps and race runs rather than four-hour enduro epics.

Sizing tends to run true, but the important thing is to measure your head circumference just above the eyebrows before ordering - Lazer's size ranges overlap less than some brands, so getting that measurement right saves a return. The TurnSys dial at the rear lets you micro-adjust the fit without removing the helmet, which is genuinely useful when you're layering a buff underneath on a cold Scottish morning and the fit shifts slightly. Interchangeable cheek pads let you fine-tune the lateral hold - go tighter for racing, give yourself a touch more room for longer days. It's worth noting that cheek pads are a consumable on any full face helmet; if yours are starting to pack out, Lazer helmet spares stock replacements directly.

If you're after a standard open-face trail lid rather than a full face, our Lazer helmets page covers the broader range. For younger riders just getting into gravity riding, the Lazer kids helmets section is the place to start.

Ventilation and Care for UK Trail Conditions

Here's the thing about UK enduro riding that doesn't always make it into product marketing: the climbs are often humid, slow, and relentless. Winching up a sodden moorland track in August with a full face on is a different experience to blasting a dry alpine descent, and a helmet's ventilation channels need to perform in both scenarios. The Cage KinetiCore's port sizing is genuinely generous - not a token gesture - and the internal channelling moves air efficiently even when you're barely generating your own breeze.

Goggle integration is properly thought through too. The visor geometry and rubber grip strip at the top of the goggle port keep your goggles locked in place on rough ground - no sliding, no gap between goggle and helmet foam. On a wet Welsh stage where visibility is already compromised, that's not a minor detail. Pairing with dedicated Lazer sunglasses and goggle spares gives you a system that's designed to work together rather than fighting each other. The breakaway visor is worth mentioning here too: it's designed to release cleanly under impact rather than levering your head, which is a genuine safety consideration on a crash rather than just a weight-saving trick.

On the maintenance side, full face helmets take a lot of abuse in UK conditions - mud, grit, and general grimness accumulate fast. The cheek pads and interior liner on Lazer's gravity lids are removable and washable, which sounds obvious but isn't universal. Pull them out after a muddy day, rinse with lukewarm water and mild soap, let them dry naturally away from direct heat, and you'll extend the lifespan of both the padding and the helmet's overall hygiene considerably. Don't leave packed-out, saturated pads in the helmet between rides - they'll start to smell and the foam will degrade faster. If you're riding through winter and want to stay visible on those short-day missions, Lazer lights are worth adding to the kit list.

Compared to Troy Lee Designs full face helmets or Giro full face helmets, Lazer's range trades a little brand noise for solid engineering substance - the KinetiCore integration is a meaningful technical differentiator, not just a badge. If weight and ventilation are your primary concerns alongside certified downhill protection, Lazer's lineup deserves serious consideration.